There are few household appliances that strike fear into the hearts of owners quite like a vacuum cleaner. These hulking beasts of cleaning might look innocuous enough, but as anyone who has dared to switch them on will know: they’re terrifying. however, it is important to know How to Break a Vacuum Cleaner.
If there’s one appliance you don’t want to break, it’s your vacuum cleaner. They cost a lot of money, after all. It’s not uncommon for people to break their vacuum cleaners in the process of fixing them. After all, even experts have trouble with vacuum cleaners from time to time.
The good news is that—if you follow these simple tips—you won’t have to pay someone lots of money to fix your vacuum cleaner again any time soon. In this post, we’ll show you how you can break your vacuum and save yourself the expense and inconvenience of bringing it somewhere for repair or replacing it again anytime soon. So read on, and let us help you break your vacuum
Only a monster would construct such an instrument of torture, so when your vacuum cleaner starts making weird noises and sprays dust up the wall instead of sucking it up, the logical thing is to break it. It’s the only way to be sure.
Check Also: Best Vacuum Cleaner for Carpets uner 100 dollars
Step 1: Find the DUST FILTER
The dust filter is the vacuum cleaner’s first line of defence against itself. It caught the excess parts and screws and various other bits and pieces used in the construction of your vacuum, making it quieter and easier to use.
What you’re looking for is commonly found on the front of the vacuum, but it’s also worth checking your instruction manual just in case it’s in a different place. WARNING! The dust filter will be covered in dust, so don’t do anything silly like inhale it.
Make sure you wear protective gloves, eye protection and a face mask as a precaution. Once you’ve located the dust filter, remove it. You may need a screwdriver or spanner to loosen the screws holding it in place.
Step 2: Apply pressure to the VACUUM
Press down on the vacuum’s body. If it’s a cylinder vacuum, you can use the floor or a wall for extra force. You can also use something heavy like a dumbbell or large stone to apply additional pressure.
If the vacuum is a bagless model, apply pressure to the bag, or if it’s a bagged vacuum, apply pressure to the bag holder. WARNING! Be aware that some vacuum cleaners have weak points that, under pressure, crack and break. If this happens, try a different point of pressure before trying again.
Step 3: Smash the BELT
The belt may look flimsy, but it’s actually one of the vacuum cleaner’s most important parts. It transfers the suction and power from the motor to the rest of the machine and without it, there’s not much point trying to break the machine.
If you can’t see the belt, open the top of the machine. You may need a screwdriver if it’s held in place with screws. Once you’ve located the belt, smash it with a hammer. You can also cut it with a knife or scissors if you don’t have a hammer.
WARNING! Make sure you’re wearing gloves and eye protection. You don’t want to get any belt fragments in your eyes.
Step 4: Destroy the ROLLER
The roller is one of the most important parts of the vacuum cleaner. It’s what guides the suction around the room and pulls the dirt into the machine.
If you can’t see the roller, open the top of the machine and look inside. If it’s not at the top, check the sides and back as well. The roller is usually made from rubber, so you can bash it with a hammer or use a knife to cut it.
WARNING! The roller is usually near the bag or belt and can be difficult to avoid when smashing the other parts. Make sure you wear gloves and eye protection.
Step 5: Tear APART the MENDING COLLAR
The mend collar is a cap that repairs any damage to the vacuum. It’s supposed to fall off when there’s been enough damage, but not all vacuums work this way. Some will keep going even with a broken mend collar.
The mend collar is usually found near the roller, but again, check all parts of the vacuum. Once you find the mend collar, tear it apart. You can use your hands, a knife or scissors. Make sure you keep some of the pieces as you might need them to repair your vacuum later. If you want to go the extra mile, you can also cut any wires that are exposed.
Bend The Bumper and Break the Dust Bin
First things first: see if you can bend the bumper. If the bumper is bent, that’s a sign that the whole thing has broken. Bumpers are designed to protect the rest of the vacuum, but if they’re broken, then the rest of the vacuum can’t do its job.
If the bumper is broken, the rest of the vacuum probably is too. Another thing to look out for is a broken dust bin. The dust bin is designed to collect the dirt you’re vacuuming up. If it’s broken, though, the dirt isn’t going anywhere.
That’s a sign that the whole vacuum is broken, too. Take note of how full the bin is. If it’s over half-full, that’s a sign that the vacuum isn’t working properly.
Shake up the Dust Bags
If your vacuum has a dust bag, you can shake it up to see if it’s in good working order. A working vacuum draws the dirt out of the dirt bag and sucks it into the vacuum. If there’s nothing in the bag, though, it can’t be doing its job.
If you shake the bag, you’ll notice that it doesn’t rattle like a full bag should. That’s a sign that the vacuum isn’t working properly. If it’s shaking but not rattling, that’s a sign that the bag is full, but the vacuum isn’t working like it should be. You’ll want to change the bag, clean the filter, and get the vacuum back to normal working order.
Rip Out the Cord
You might think that the cord is just something that’s there to look pretty. In reality, though, it’s an important part of the vacuum. If the cord is worn out or broken, the vacuum can’t work properly. That’s why you’ll want to rip the cord out and see how it’s doing.
If you pull it out, you’ll notice that it’s probably worn out. It’s probably frayed and thin. If it’s not in good working order, the vacuum isn’t either. If the cord is in bad shape, you’ll need to replace it before you can consider your vacuum to be in good working order again.
Slam it into corners
Your vacuum cleaner is supposed to be able to clean corners, but if it can’t then that’s a sign that it’s broken. One way to figure out if it can or can’t is to slam it into corners. If you notice that it gets stuck, then it’s not able to clean corners like it should be.
If it gets stuck, that’s a sign that the vacuum is broken. You’ll want to see if you can fix it or change it, though. A vacuum that can’t clean corners isn’t going to be very useful to you.
FAQS
Why would you want to break your vacuum cleaner?
There are a few reasons why you would want to break your vacuum cleaner. The most common reason is that you don’t have the money to replace it. You can break your vacuum cleaner so you don’t have to use it, and you don’t have to spend money on a new vacuum. You might also want to break your vacuum if you’re trying to fix it. If you have a clogged vacuum, you can break it by bending the bumper, shaking up the dust bags, ripping out the cord, or slamming it into corners.
Can you break a bagless vacuum cleaner?
You can break a bagless vacuum cleaner if you want to. If you want to break your bagless vacuum cleaner, you should shake up the dust bin or break the filter.
I have a vacuum cleaner and I keep getting it stuck in the bag. Why is that?
The tank is made of plastic, but you can break it if you’re not careful. Some people use a hammer to get the tank to come off. Once you break the tank, don’t forget to take out the head. Now if everything works fine, you can replace your tank with a new one made out of metal or plastic. Your vacuum should still work properly after this step though
I have a vacuum cleaner that is making a lot of noise. What can I do?
You can clean your vacuum cleaner with the hose. The only thing you should worry about is that it’s not in the proper position and that you have to use the suction control to get it to work properly. You can also use some kind of cleaning brush on the hose that comes with your vacuum cleaner.
Can I use my vacuum cleaner for other things besides vacuuming?
Most people who keep their vacuum cleaner for more than one purpose keep it on a shelf in their kitchen or garage where they don’t see much use. If you want to keep your vacuum cleaner for more than one purpose, then you need to be careful with what you put in it because having a bunch of different attachments can make them all clump together and make them hard to clean. You would need an air filter to prevent this from happening if you want your vacuums to last longer.
Conclusion
Hopefully, you’ve managed to break your vacuum cleaner with these helpful tips and tricks. Now you can enjoy the cleanliness of a new vacuum without having to spend the money on a cleaner. Or you could just buy a new one and treat yourself.
There are plenty of great vacuum brands available, and you deserve to have the best. If you have followed these steps and your vacuum cleaner is still intact, don’t worry! Just try again with a different vacuum cleaner next time. They’re not all as strong as you might think.
