Sunbeam is an industry leader in making water dispensers that are easy to use and maintain. The Sunbeam WDA2245W is a popular model among consumers looking to purchase a water dispenser.
Cleaning your water dispenser is a necessary part of maintaining great taste and preventing any potential health risks.
This guide will show you How To Clean Sunbeam Water Dispenser: A Comprehensive Guide for you.
Cleaning Basics
Cleaning your water dispenser is an essential part of its upkeep. The best way to clean your water dispenser is to use hot, soapy water and a non-abrasive sponge made of plastic or rubber. Using this method, you can easily remove any residual residue that may have gotten into the cracks and crevices around the spigot and base.
However, if you want to get more extensive in your cleaning process, you can also use a toothbrush with soapy water to scrub any dirt that has accumulated on the inside of the jug. To clean out the residue from around the spigot, you can use a pipe cleaner or a paper clip in order to help remove any mold that may be present.
The water dispenser comes with a few parts that need to be cleaned. The main parts are the exterior, the reservoir, and the lid.
1) Exterior – This is where you will clean any spills with a damp paper towel or cloth and wipe dry.
2) Reservoir – After removing the reservoir from the base of the dispenser, use a bottle brush or dish scrubber to clean the inside of the tank. Use hot water and soap if desired but do not pour boiling water into the tank as it may crack. Rinse with cold water, then put back into place in base of dispenser.
3) Lid – Take off lid and wash by hand in warm soapy water or place in dishwasher top rack with no detergent for sanitization.
How to Remove and Clean the Filter
One of the most important parts of your Sunbeam water dispenser is the filter. The filter protects your water from contaminants and can help extend the life of your machine by preventing mineral buildup.
You should clean or change your filter every 2-6 months, depending on use. The filter will start to clog after this time period and can cause a decrease in water pressure and an increase in maintenance efforts.
To remove the filter, first unplug the machine to turn off any power source. Then remove the top cap that covers the water tank. Remove any standing water with a towel and then lift out any collected debris with a spoon or spatula.
Unscrew the ends of the filter from either side and rinse both sides under running water before placing it into a clean container for storage until you’re ready to replace it with a new one.
Related article: How to Make a Water Dispenser for Dogs.
Change the filter cartridge
The first step to cleaning your water dispenser is to change the filter cartridge. Sunbeam recommends changing the filter cartridge every two months for optimal taste and health benefits.
To do this, remove the top part of the water dispenser to expose the filter cartridge. Remove the cartridge by popping it out from its edge with your fingers. Place a new filter cartridge into the dispenser and make sure it is fully inserted into its proper place.
The next step is to put back on the top cover and tighten it with a screwdriver or a nut driver. Once you have it tight, you can turn on your water dispenser and try some water to test if it is working properly.
Remove the water filter from the dispenser lid
Hold the water filter with one hand and twist to the left with your other hand. This will loosen the seal and allow you to remove the filter from the lid.
Rinse with water and pat dry
The first step in cleaning your water dispenser is to rinse it with water and pat dry. It’s important to thoroughly rinse the dispenser before wiping it down with a damp soapy cloth.
This will help remove any dust or dirt particles that may have accumulated on the exterior of the machine. A wet rag should be used to wipe down the exterior of the machine, including all buttons, levers, screens, and doors.
How to Clean the Water Tank
The most important part of cleaning your water dispenser is making sure to take care of the water tank, which contains the water that will be dispensed. There are two ways to clean the water tank: you can use an automatic cleaner or a manual cleaner.
An automatic cleaner is typically a powder that you mix with water, then pour into the reservoir. The mixture will dissolve and attach to the inside of the tank, removing any standing residue. We recommend using an automatic cleaner every few months for best results.
A manual cleaner is usually a solution (like vinegar or baking soda) with a brush. You simply fill up the reservoir with water and soap then scrub it down with a stiff brush.
This will loosen any remaining dirt and impurities in your Sunbeam WDA2245W’s water tank so they can be washed away more easily.
How to Clean the Dispenser Trim and Lid
To clean the trim and lid, you will need a clean sponge and a small amount of dish soap. Wet the sponge with water and then dab the soapy water on the trimmings to remove any debris or grease.
Rinse the trimming pieces well with water. You should also scrub away any stains or residue using a toothbrush.
The next step is to use a towel to dry off any soap residue. Make sure to dry all surfaces thoroughly as you still want your dispenser to look good while being thoroughly cleaned.
FAQS
What should you know before cleaning your water dispenser?
When you are cleaning your water dispenser, it is important that you unplug the machine and turn off the faucet. You also want to make sure that any ice cubes that have made their way into the dispenser have been removed.
How do you clean your Sunbeam water dispenser?
Start by taking the top off of your water dispenser and emptying out any remaining water. Grab a cloth or sponge and some soap or dishwashing liquid. Start wiping down all surfaces in the interior of the tank, including all components such as the handle, faucet, storage compartment for ice cubes, and filter. Rinse with hot soapy water and wipe dry with a clean towel or paper towel. Reassemble your machine by placing the top back on securely with no gaps in between. Place any stored items back in their designated area and plug back in if necessary.
Conclusion
Keeping your water dispenser clean is an important part of maintaining good health. There are a few different ways to clean your water dispenser and it’s important that you always use the correct cleaning method for the specific parts you’re cleaning.
In this post, we’ve covered the different parts of the dispenser, how to remove and clean the filter, and how to clean the water tank.
To make sure that your water dispenser is always clean and ready to use, schedule a yearly maintenance appointment with your local service provider.
You’ll thank yourself in the long run!
