Have you ever used a Whirlpool refrigerator before? If not, then you may be unaware of the importance of keeping your water dispenser clean.
You may need to learn How to Clean Water Dispenser in Whirlpool Refrigerator by following these simple steps, you’ll be able to keep your water tasting fresh and crisp.
You will also save on future costs by reducing the need for mold-fighting chemicals and helping to prevent the growth of bacteria in the dispenser.
Related article: How to keep My Ge Refrigerator Water Dispenser from Freezing.
Why you need to clean your water dispenser
Your refrigerator may be a great appliance, but if you don’t clean it occasionally, it can start to smell funky and develop mold growth. This is especially true for the water dispenser area.
The water dispenser is an optimal breeding ground for bacteria and mold because it comes into contact with water all the time. Even if the water is filtered, it still has a high likelihood of developing bacteria in the dispenser.
The only way to ensure that your refrigerator smells fresh and clean every day is by cleaning its water dispenser on a regular basis.
By following these simple steps, you’ll be able to keep your refrigerator from smelling bad and reduce some of the problems that come with mold buildup in your fridge.
What kind of detergent should I use?
There are many different types of detergents that you can use to clean your water dispenser in a Whirlpool refrigerator.
You’ll need to experiment with which one is right for your water dispenser, considering the type of material it is made out of.
Most water dispensers have a plastic lining that can be cleaned using dish soap and hot water.
However, if you have a stainless steel or copper lining, then you should use an acidic solution or special cleaner to ensure that the metal doesn’t get scratched or damaged by the dish soap.
Step 1: Mix Baking Soda and Vinegar
The best way to clean the water dispenser is to mix baking soda and vinegar. To do that, pour half a cup of vinegar in a bowl, and then add one tablespoon of baking soda.
Mix them until they form a smooth paste. Baking soda and vinegar are some of the most effective cleaning agents. They have a strong odor that can overpower other bad smells.
Once you have mixed them, you can apply their paste to the water dispenser and leave it for a few hours. This will help break down all the stains inside the dispenser and leave it smelling nice and fresh.
Step 2: Add Baking Soda to Neutralize Odors
The water dispenser is likely to have a lot of bad smells inside of it. One way to make sure that they do not come back is to sprinkle some baking soda inside it.
This will help neutralize the bad smells, and it will leave your refrigerator smelling nice and fresh. Baking soda is one of the cheapest and most effective ways to eliminate odors.
You can pour a few tablespoons of baking soda into the water dispenser and then close it up.
This will keep the baking soda inside the dispenser and will ensure that it neutralizes all the bad smells. To ensure that the baking soda works its magic, leave it in the dispenser for at least one week.
Step 3: Empty the Water Dispenser
Before you start cleaning the water dispenser, you must first empty out its contents. To do that, turn off the water supply to the dispenser, and then open it up.
Make sure that the water is turned off or it may overflow and make a mess. You can use a small cup to collect the water and then throw it away.
Empty the water dispenser, and then wipe it. You can also clean the inside of the dispenser with a small brush.
Step 4: Remove the Bottoms
The next thing you need to do is remove the bottoms from the water dispenser.
To do that, you need to first remove the filter and then unscrew the bottom part of the dispenser. You can do that with a Philips screwdriver.
After removing the bottom parts, you can scrub them with a brush and soap. Make sure that you scrub the inside of the dispenser too.
If you have hard water, you can use a bristle brush to scrub the inside of the dispenser.
Step 5: Scrub the Inside and Outside
The next thing you need to do is scrub the inside and the outside of the water dispenser. You can use a sponge and soapy water to scrub the inside.
You can also use baking soda to scrub the inside of the dispenser.
After cleaning the inside, you can move on to the outside of the dispenser. You can use a sponge and soapy water to scrub the outside of the dispenser.
You can also use baking soda to scrub the outside of the dispenser.
Step 6: Use Vinegar to Clean Bad Smells
Another way to clean the water dispenser without spending too much time and effort is to use vinegar. You can put some vinegar in the dispenser and leave it there for a few hours or even a day.
This will help eliminate the bad smells inside of the dispenser. The level of vinegar will depend on how strong you want the smell of it to be.
You can use a small cup to hold the vinegar, and then pour it inside the dispenser when it’s full.
How to Disinfect the Water Dispenser in a Whirlpool Refrigerator?
The best way to disinfect the water dispenser is to put a small amount of bleach in it. You can use a small cup to hold the bleach, and then pour it inside the dispenser.
Close the dispenser, and leave it there for a few hours. This will help disinfect the dispenser and kill all the bad germs inside of it.
You can also put some baking soda in the water dispenser and leave it there for a few days.
This will help eliminate the bad smells inside of the dispenser and will leave it smelling nice and fresh.
How do I scrub the inside of the water dispenser?
The first step in cleaning your water dispenser is to remove the dispenser and scrub the inside of it with a toothbrush.
You should also clean the side of the fridge where the water dispenses by using a damp towel and soapy water.
If you are unable to remove the dispenser, then you will have to vacuum off any debris that may be inside.
Wipe down the outside
The first step to any clean-up is to wipe down the outside of your refrigerator. This includes wiping down the rubber seal and checking for any dirt or leftover food particles.
If you find anything, then be sure to pick it off with a damp cloth before you move on.
Rinse and dry your water dispenser
The first step in how to clean a water dispenser is the most obvious: rinse and dry your water dispenser. Be sure that you remove any remaining water from the dispenser after you’ve filled up your glass.
If you don’t, then this will cause mold or bacteria growth as well as stagnate the water.
FAQS
Why is it important to clean my water dispenser?
Think of your water dispenser as a sponge. If you never clean your sponges, then you’re going to have mold and bacteria growing in them.
Is there any way I can clean the water dispenser without removing it from the refrigerator?
Yes! You will need a stiff-bristled brush, some dish soap, and some warm water. First, remove any ice if there is any in the dispenser (soak unused ice cubes in a resealable bag for later use). Then, empty out all of the remaining water into a glass or cup before scrubbing down all of the surfaces with warm soapy water. Once the inside of the dispenser has been thoroughly scrubbed, run fresh cold water through it until it is clear and free of debris. Let dry before replacing back onto appliance.
Will cleaning my water dispenser help reduce costs?
Yes! By helping to prevent mold growth and bacteria growth in your fridge’s water dispenser, you will be able to save money on having to purchase expensive mold-fighting chemicals and reduce the need for having to combat bacteria related smells in your refrigerator (spending less time and money).
How often should I clean my water dispenser?
You should clean your water dispenser once a month. This is to prevent the accumulation of bacteria and to keep it tasting fresh and crisp. If you notice an increase in the amount of particles that accumulate on the inside of the dispenser, then that’s a sign that you need to clean your Whirlpool refrigerator more often.
Conclusion
Cleaning your water dispenser regularly will help keep it running smoothly, but also make it safer to use.
The best way to clean a dispenser—whether it’s in your refrigerator or in your office kitchen—is to start with an empty water dispenser.
Then, rinse the inside of the dispenser with water that has been mixed with ¼ cup of vinegar and let it air dry.
If you want to use a cleaner, then make sure you use a cleaner formulated for water dispensers, and follow the directions on the bottle for dilution.
To clean the outside of the dispenser, use a soft cloth and a gentle detergent or dish soap.
Be careful not to use too much detergent or you can leave a slippery residue. Rinse and dry the outside of the dispenser before putting it back in place.
Phew! That’s it! You did it! You successfully cleaned your water dispenser. Now you can enjoy that refreshing glass of water guilt-free.
