Blinds are great for blocking light and keeping your room warmer in the winter. However, sometimes you just might want to change the look of your room by adding curtains. If this is the case, here’s a simple tutorial on how to convert your blinds into curtains.
It’s important to note that you’ll need to measure your blinds first before making any cuts. You also need to know which direction they pull in order to plan accordingly. For example, if your blind pulls upwards, then you will want to make sure that the curtain rod can accommodate that motion. And if it pulls outwards, you will want the curtain rod on the inside of the window frame. Here are some helpful tips on how to measure and install curtains on blinds!
Related Article: How to Make Curtains Look Thicker: 5 Easy Tricks to Get the Job Done
Measure your blinds
It’s important to measure your blinds first before making any cuts. In order to convert your blinds into curtains, you will need to know how long they are and where the pull cord is located.
Determine which direction your blind pulls in
The first thing to do when converting your blinds to curtains is determine which direction your blind pulls in. You can do this by measuring the distance between the top of the blind to the bottom. If the pull is upwards, then measure from the top of the window frame to get an accurate measurement. If it pulls outwards, measure from the inside of the window frame to get an accurate measurement.
Create your curtains
The first step is to create your curtains. To do so, you will need a measuring tape and a pair of scissors. Measure the length that you want your curtains to be and cut the fabric accordingly. If you’re using two layers of fabric, then double-check that you have enough fabric for both layers before cutting it. Next, measure the width of the blinds and cut your curtain rod to size.
Install the curtains
The first step is to remove the blinds from their brackets. Cut a slit in the fabric large enough to fit the width of the curtain rod through. You should also cut a hole in the fabric for the curtain rings.
Next, measure and cut a piece of wood to fit the window frame and drill holes in each end for screws.
You’ll want to screw one side of the board into position just below where your top bracket was, then secure it with adhesive on the other side.
Lastly, attach your curtains from above by sliding them over your previously installed board. Once you’ve done this, you can hang your new curtains using curtain rings!
Remove the excess strings and tassels
Remove the excess strings and tassels on the blinds. Remove the metal pieces that secure the strings. If you pull up on the string, it will come off easily. You can also use a straightening iron to heat up the string and then pull it off.
Mount your curtain rod on the inside of your window frame
Make sure that the curtain rod is mounted on the inside of your window frame so that when they pull in opposite directions, it can accommodate. Don’t mount them on the outside of the window frame. If you want to cover the entire width of your blinds, then you will need a double curtain rod that will measure around 96 inches in length and be about 1 inch wide.
What are the benefits of changing your blinds?
Blinds can be lovely and practical, but sometimes you just want a change. There are two main reasons why you might want to convert your blinds to curtains:
• To make your room look more attractive
• To save money (blinds will tend to cost more than curtains)
Most people choose to convert their blinds to curtains for the first reason, but it’s also a good idea if you want to save some money. Curtains typically cost much less than blinds and they’re much easier to install! If you’re looking for a budget-friendly option, then this is the way to go.
Final thoughts
There are a few key things to keep in mind when it comes to converting your blinds to curtains. You’ll need to measure the width of the blinds and then add an inch or two when cutting. You’ll also want to make sure that you add a couple inches when cutting the length of the fabric. This will help give your curtains a natural fullness when pulled closed.
Measure
Take measurements for both height and depth.
Add one or two inches
Cut curtain fabric an inch or two longer than measurements, making sure it is at least a couple inches wider than height and depth measurements.
Attach
Attach brackets in intervals on top of each other with screws, anchors, or nails if necessary.
FAQS
What material should I use for the curtains on my blinds?
Curtains work best when using a light weight fabric.
Do I need to install curtain hardware?
You will need to make sure you have some kind of hardware installed in order to hang your curtains on your blinds. You can purchase a wide variety of curtain accessories, including rods and hooks.
Is it difficult to measure and cut the blinds?
No, measuring and cutting the blinds is fairly straightforward. All you need is a ruler, scissors, and a pencil! Follow these steps for converting your blinds into curtains: 1) Measure the width from top to bottom. 2) Measure from one side of the window frame to the other. 3) Cut down the middle of the length until it’s at least two inches shorter than what you measured in step two. 4) From this piece of fabric, cut out two panels that are as wide as your measurements from step one. 5) Sew or hem each of these panels separately so there is no raw edge showing on either side when finished. 6) Find where you want your curtain rod or bar installed (this is usually towards the center). 7) Install an appropriate hook at this location (this will depend on whether your rod pulls inwards or outwards). 8) Hang one panel over each side of this hook with thumbtacks or pins; then tie them together in the back with string or ribbon!
Conclusion
If you’ve been thinking about changing your curtains to blinds, there are a few things you need to keep in mind. The first thing you should do is measure your blinds and create a plan for your design. Once you have the measurements and design, you can finally start sewing! Install the curtains and enjoy the benefits of changing your blinds — it’s not just a simple switch!
With this simple, cost-effective DIY project, you can create new curtains for your home window. You’ll get to mix and match colors and patterns, and you’ll get to customize the length of the curtain to your specific needs.
It’s also an affordable alternative to new curtains, which can get expensive. If you’re looking for creative ways to decorate your home on a budget, this project is for you!
If you need help doing the project yourself, read our step-by-step tutorial.
