The ring top curtains are a new trend in the world of window dressings. The curtains are an attractive and functional way to add some spice to your home while maintaining a clean, tidy appearance. If you’ve been thinking of converting your old curtains into a ring top curtain, then this guide is for you! We’ll cover everything from what a ring top curtain is and how it functions, to the materials that will be needed and the steps involved in creating one. Let’s get started!
Related Article: How To Do Curtains on Skate 3 – A Step by Step Guide.
What is a ring top curtain?
A ring top curtain is a type of window dressing that consists of a rod with rings on it. The rings are used to hang the curtain from, and they can be as wide as you want them to be. The more rings you have, the higher your curtains will hang from the rod.
How do ring top curtains work?
Ring top curtains function the same way as a regular curtain. The only difference is that there is a rod or pole in the center of the window with an additional metal ring attached to the top of the rod. This metal ring replaces the hook on your old curtains and can be used to tie back your curtains or hang them on.
The ring top curtains are an attractive and functional way to add some spice to your home while maintaining a clean, tidy appearance. If you’ve been thinking of converting your old curtains into a ring top curtain, then this guide is for you! We’ll cover everything from what a ring top curtain is and how it functions, to the materials that will be needed and the steps involved in creating one. Let’s get started!
Materials for a ring top curtain
To make your own ring top curtain, you’ll need:
-Fabric
-Scissors
-Pins
-Ruler or tape measure
-Iron and ironing board
-Sewing machine and thread (or needle and thread)
-Stuffing material (optional)
Steps for a ring top curtain
1.
Measure the curtains from the top of the rod to the floor to figure out how long you need your rings to be. This will help you cut them so they are all the same length when you’re done.
2.
Cut a strip of fabric that is three inches wide and at least four or five times as long as your measurement from step 1. Fold it in half length-wise with right sides together and sew a seam down one side, then flip it inside out and iron flat.
3.
Sew a seam on one end of your ring top curtain using a sewing machine or by hand, whichever works best for you. Fold the other end over about an inch and sew it down with a straight stitch, ensuring that there is enough fabric left for another seam later on. Make sure not to sew too close to this edge, but leave enough space for a seam allowance when sewing it shut again.
4.
Sew around your ring top curtain about an inch away from the edge all the way around its circumference, leaving about two inches unsewn at both ends before sewing shut again on either end of your curtain with a straight stitch or zigzag stitch by hand between each roundabout pass with needle and thread.
Measure your window and purchase the fabric needed
The first step in converting your curtains into a ring top curtain is to measure the window you will be using. The measurements should include the width and height of the window, as well as the length of both panels of fabric that will be needed. Once you have these measurements, you can go about purchasing your fabric.
Take off your old curtain rod and measure the remaining fabric
First, you’ll need to take off your old curtain rod and measure the remaining fabric. The length of fabric needed for a ring top will depend on how long you want the curtains to hang at the bottom.
Cut the remaining fabric using those measurements
After finishing the first round of cuts, you should have some extra material left over. Cut this fabric to measure the circumference of the ring top- it doesn’t need to be precise. If your fabric is too long after these measurements, cut off any excess.
Hem one side of the new fabric, leaving the other as-is
1. Measure the width of curtain panel
2. Measure the length of the curtain panel from the bottom hem to the top hem
3. Cut a piece of fabric so that it’s ½ inch wider than the original fabric and just a bit longer than the width of the original fabric
4. Hem one side of new fabric, leaving other as-is
5. Fold raw edge over ¼ inch
6. Sew edge down with a zigzag stitch or double needle
7. Wrap new fabric around original curtain panel and sew it in place at top hem, making sure to leave an opening at one side for inserting hardware
8. Replace hardware on curtain panel with ring hooks or rings, depending on preference
9. Attach rod(s) to backside of curtain panel using appropriate screws and bolts
FAQS
What is a ring top curtain?
A ring top curtain consists of two curtains. The first curtain is the actual fabric that hangs down and creates the actual look of your curtains. This fabric can be made from any material, but typically, it is made from a thinner, lighter material such as polyester or cotton. The second curtain is actually a pocket-like material that goes over the first fabric to create the ring top appearance. This second material also needs to be thin and light in order to allow for both fabrics to flap correctly while creating an aesthetically pleasing appearance.
Will I need a sewing machine?
You won’t need a sewing machine for this project, but you will need some spare time to complete the steps.
What materials do I need?
You’ll need a curtain rod with clips and screws, scissors, tape measure, grommet setter, drill with bits for drilling holes, and a hammer. You can find all of these materials at your local hardware store or craft store.
How long does it take to make a ring top curtain?
This project can take anywhere from 15-30 minutes to complete.
Conclusion
The ring top curtain is easy to install and can be done in just minutes. The best part is, the entire project costs less than $20, so you can’t go wrong.
If you’re looking for an inexpensive way to update your bedroom or living room then this is an easy option that won’t break the bank.
This ring top curtain is perfect for people who are renting their home and can’t make permanent changes, or for those who are on a tight budget.
Ring top curtains are a unique way to update your windows. Not only can they be made from your old curtains, they also don’t take up much space, and they’re easy to install. As long as you take the measurements of your windows and measure the fabric you need, you’ll be able to make a custom ring top curtain in no time at all!
And if you’re looking for a more creative way to design your living room, you can use your old curtains as a headboard or wall decoration. The possibilities are endless!
