How to Install Primo Water Dispenser

Do know How to Install Primo Water Dispenser? Primo is the leading manufacturer of water dispensers and filters in North America. It has been manufacturing high-quality products since 1949, and many people consider it to be the most reliable brand on the market.

Primo offers a variety of models to fit any budget, with their most popular model being the Primo Pure. There are many great reasons why people choose a Primo water dispenser over other brands, but it can be difficult to know which model is best for your needs. This guide will teach you what you need to know about how to install primo water dispenser so that you can start enjoying fresh water at home today.

You may also loo k at our other article on How to Use a Water Dispenser

What is a Primo Water Dispenser?

A Primo water dispenser is a high-quality water filtration system that will transform your tap water into the cleanest, freshest, best-tasting water you’ve ever had. They offer a variety of models to fit any budget and will satisfy even the pickiest of drinker. Primo offers five different models: Pure, Classic, Classic Plus, Deluxe, and Ultimate.

The most popular model is the Primo Pure model which is designed for everyday home use. You may also need to understand the primo water dispenser parts list.

Step 1: Find a Location for your Primo Water Dispenser

The first step is to find the perfect spot for your Primo water dispenser. You’ll want to take into account a few factors when determining where the best location is for your Primo water dispenser.

– Is there enough room for the unit? You’ll need about two feet of extra space on either side and at least five feet of height above it.

– Is there a nearby “fresh” water source? You will need to connect to fresh water and most sinks don’t offer it. A kitchen sink or laundry sink would be best, but you could also use a hose set up to provide you with clean, fresh water.

If this isn’t an option, you can install a new fresh water line coming from the house out to your Primo installation.

Step 2: Install the Fresh Water and Drain Lines

The next step is to connect the fresh water and drain lines. To do this, you will need a Primo faucet with a 1/4″ male pipe thread. If you don’t have one, they are available at most hardware stores.

To connect the water line to the faucet, use a hose clamp to secure it tightly. Then attach the hose to your sink or other source of fresh water. For the drain line, use a Female Pipe Thread Adapter with a capacity of 0.25″ ID x 0.5″ OD x 1/2″ FNPT and attach it to the drain under your sink.

Then screw in two brackets on either side of the dispenser to support it securely in place. This will help make sure that your Primo is safe and secure for years of service.

Step 3: Wiring and Venting

After connecting your Primo water dispenser to fresh water and drain lines, you’ll need to wire it. The wiring and venting step is the most complicated part of the installation, but we’ll walk you through it slowly. First, look for a GFCI powered outlet near the sink.

If there isn’t one nearby, any GFCI outlet will work. Next, let’s find a suitable location for the wall-mounted power transformer that came with your water dispenser kit. You want it as close to the water dispenser as possible without running any cords across traffic areas or doorways.

Once you have the power transformer in place and all cords are tucked away, run wiring from the transformer to your water dispenser using cord included with your kit. Use wire clips to secure loose wires to wall studs or pipes if necessary. Finally, mount the cover plate on top of your Primo water cooler so everything looks neat and professional.

Step 4: Finish Up and Enjoy!

The last step is to install the water pressure regulator. This device ensures that the water doesn’t come out too quickly and splash out of your dispenser. It also protects against bacteria, as well as prevents any potential leaks.

The installation process ends with some plumbing:

– Install the shutoff valve for your water supply line (this will be located near your Primo)

– Attach the spigot for your cold water into the Primo

– Attach a drain hose from your Primo to a waste container

Below is primo water dispenser parts diagram

Important Safety Tips

The following points are important to keep in mind during installation:

– Primo water dispensers use a safety float switch to shut off the water when the container is empty. If you have any doubts about your ability to install it properly, please contact Primo Customer Service for assistance.

– The power cord should be routed away from the water line. This will ensure that if there is an electrical short, the cord will not come into contact with water and potentially cause a fire.

– The power cord should also be free of any sharp bends; this will prevent the cord from breaking and creating a potential hazardous situation by having exposed wires.

Why Choose a Primo Water Dispenser?

Primo water dispensers are the most popular brand in North America, which makes it easier to find parts and repair services. People also choose Primo over other brands because it is one of the least expensive brands that still offers a warranty for up to five years. Primo also holds a high customer satisfaction rating on Amazon because many people have experienced great benefits with this water dispenser.

Primo only manufactures water filters and dispensers, which means there are no other products to buy in order to use it.

Installing Your Primo Pure (or any other Primo model)

Installing a Primo water dispenser is a straightforward process. Primo has created an installation guide that you can use to navigate the process. The guide walks you through every step, from preparing for installation to installing your new water dispenser.

Preparing for Installation

Before you start the installation, there are a few things you need to do first. The first thing you need to do is determine where the water dispenser should go. You will want to find a spot that has easy access to an electrical outlet and is near a sink or faucet.

Once you have found the perfect spot, make sure it has enough space for the water dispenser. Measure the length and width of the area and then decide if it is large enough for your needs. If not, look into other places in your home that could work better.

Once you have determined where to install your water dispenser, wash down any walls or counters in that area with a damp cloth in preparation for installation.

This ensures that any dirt or dust on the surface will be removed so your new machine won’t get dirty from touching it. It’s also important to make sure you have at least one gallon of water available for priming the machine before installation so that it doesn’t run out during use and break down prematurely.

Now that you are prepared for installation, turn off any nearby faucets so they don’t leak during installation! Finally, unplug your old water dispenser if there is one installed in the same location as this Primo product (you’ll want to keep it plugged in somewhere else). Now it’s time to install!

Tools You’ll Need for the Installation Process

Before you dive into the installation process, make sure you have the necessary tools for the job. Here is a list of what you will need to install your Primo Pure water dispenser:

* A Phillips-head screwdriver * A flathead screwdriver * A set of Allen wrenches (the size depends on the model) * Water line adapters that match your water supply

Preparing the Area for Installation

The process of installing a Primo Pure water dispenser is straightforward and simple, but it will require some time. The first thing you will need to do before installing your new water dispenser is make sure that the area where you live has the correct space for installation.

The whole installation process takes approximately 2 hours, so be sure that you have enough time to take care of this project.

It is also important to prepare the area for installation so that you can reduce any potential risk of damaging surfaces or objects.

Before installing, you should remove any loose items from the countertop, like cups or plates, and place them on a lower shelf or in another room. You should also tape off the area to avoid spilling water during the installation process.

This includes taping off parts of your kitchen island or cabinets if they are not low enough for easy access. It is also a good idea to turn off any appliances that may get splashed with water during installation.

Unpacking the Machine and Inspecting It For Damages

After you purchase a Primo water dispenser, it will arrive at your home in a large box. You will need to open the box to inspect the machine for any damages before starting the installation process.

Some common damages that you may find are scratches on the outside of the machine, dents on the exterior casing, or even minor cracks in plastic parts on the inside of the box.

If there are any visible damages, then these should be noted on the delivery papers and you will need to contact Primo customer service for assistance with a return or replacement.

Mounting the Machine to Your Countertop

The installation process will be easier if you mount the machine to your countertop. This can be done with a water line kit and some screws.

First, assemble the base of the Primo Pure to the water line kit. The adapter is found on the bottom of the machine; it will show a “T” symbol. Screw in the assembly onto your countertop, then attach a cold water line and hot water line to your new base.

Next, tighten up any loose fittings by twisting clockwise. If anything feels too loose, tighten it so that it won’t leak or come undone in daily use.

How do you set up a primo top loading water dispenser?

Installing a Primo water dispenser is pretty simple. You’ll need to have an outlet on the wall and you will want it to be close to a sink but not too close. Make sure there is at least seven feet of space in front of the sink.

Next, place your water dispenser against the wall with the spout facing towards you. After that, plug it in, fill up the base with water, and add some ice cubes if you’d like.

You should also run water through your new water dispenser before pouring any hot drinks or liquids into it so that you don’t burn yourself.

And when it comes to installation, don’t forget about the installation manual that came with your new device! It will come in handy for specific instructions on how to install your device correctly including where it should be placed!

How do you install a water cooler dispenser?

Water cooler dispensers are relatively easy to install. It might take you a few hours, but it’s not an involved process.

-First, you need to find the right spot to place your water dispenser in your home. Ideally, this space should be near a water source and power outlet (although many models are cordless). You may want to take into account the proximity of the area to where you’ll want to refill your water according to how often you drink it.

-Next, you need to assemble the water dispenser by following the instructions provided by Primo. This will include attaching the spigot and faucet with fittings provided by Primo. Finally, connect the device’s electrical plug into a power outlet and turn on your water supply at a low pressure using either a normal faucet or an adapter kit (available for purchase at most hardware stores).

Make sure there is enough space between the device and any furniture that may block its operation.

How do you set up a primo bottom load water dispenser?

The first thing you will want to do is remove the water line from the back of your refrigerator and connect it to your water dispenser.

Make sure that you use Teflon Tape when connecting the water line to avoid any possible leaks. You will also need to find an appropriate place for the water dispensing unit in your home, preferably near a kitchen sink or close to a faucet.

You may want to place it on the counter or mount it on a wall so that it’s easily accessible.

Do you need to plug in a water cooler?

Primo water dispensers are electric, so you’ll need to plug them in. Water coolers have a water tank on top that needs to be filled periodically and they don’t require any installation.

How do you get hot water from a water dispenser?

The first thing you need to know about installing a Primo water dispenser is how to get hot water from it. Hot water is great for making beverages like tea and coffee, as well as cooking foods that need boiling water.

You can get hot water from the dispenser by pressing the “hot” button on the unit or by using one of the preset programs.

How do you use a primo hot water dispenser?

Primo water dispensers come with many features to make your life easier. One of these features is a hot water dispense, which allows you to heat up water for use in cooking or for other purposes.

It also has a cold water dispense and a filtered water dispense. The hot water dispenser has a separate tank for hot water, which you can use to heat up your water.

You can also use the hot water dispenser to heat up your food and beverages. The temperature of the heated water is adjustable, so you can choose the exact temperature that you want.

The cold water dispenser is used to dispense cold filtered water, which comes out at a constant temperature. The filtered system removes any impurities and odors from the water and makes it safe for drinking.

The hot and cold water dispensers are very easy to use; all you have to do is push down on the lever of the dispenser, and it will release the desired amount of hot or cold water into your cup or pot. You can also adjust the flow rate depending on how fast or slow you want your drink to come out.

Should I turn off water dispenser at night?

When you turn off your water dispenser at night, it is imperative that the water has been fully dispensed and there are no drips. The next morning, make sure to fill it back up with fresh, cold water for the following day.

Why is my Primo water dispenser not hot?

One of the most common issues that people have with their Primo water dispenser is the lack of hot water. To eliminate this issue, make sure that your Primo water dispenser is plugged in. If you plugged it in and it’s not heating up, then there might be a problem with the wiring.

This can be remedied by replacing the cord. Another possible reason why your Primo water dispenser is not heated could be because you have pressurized gas lines and your device isn’t compatible with them.

If this is the case, you need to either use a different type of gas or install an adapter kit to connect it to your pipes.

If none of those reasons seem to apply, then contact us at customer service for more information on how to fix this issue.

Primo water dispenser manual

Primo water dispensers come with a detailed manual to help you install the dispenser correctly. The manual will tell you exactly how to connect the water line and electrical cord and where to place the dispenser in your home. It also explains some of the safety precautions you should take when installing a Primo Water Dispenser.

-Pick a location that is close to an electrical outlet. Primo water dispensers need electricity, so make sure there is an outlet near by before deciding on a location for installation.

-Select a location that is level, or at least close enough for the dispenser not to be off balance. You can purchase leveling equipment from any hardware store if needed. Once you have chosen a location, it’s time to get started with installation.

Primo water dispenser parts list

– Primo Single Unit Water Dispenser

– Plastic water connection with a 3/8 inch inlet (part number 557)

– Clear vinyl tubing, 3/8 inch diameter, 20 feet long.

– Primo fitting kit (part number 571)

– Shut off valve for the water line (part number 2641)

Primo water dispenser buttons on back

The first step to installing your new Primo water dispenser is understanding the model you purchased. The model will have specific instructions for installation, so read through the manual before starting. The dispenser will have buttons on the back that you’ll need to press and hold to install.

These buttons vary depending on the model of your dispenser, but they’ll all have a similar installation process.

How do you get hot water from a water dispenser?

A Primo water dispenser produces both hot and cold water. If you want to get hot water, just pour it over ice! This will give you a refreshing drink without the use of any electricity.

How do I know if my Primo water dispenser is leaking? If your Primo water dispenser is leaking, there could be a few reasons why this may be occurring. One reason could be that the water supply line is not properly connected to the back of the unit.

The second reason could be that there is something blocking or restricting the flow of water from the reservoir into the tap. The third reason could be that there are kinks in your supply line or leaks at the faucet connection. To find out for sure, check beneath your cabinet for any signs of flooding or leaks and make sure all connections are tightened properly.

Do you need to plug in a water cooler?

One of the first things to consider when installing a Primo water dispenser is whether you need to plug it in. While many models are battery-operated, they still need power when in use. Older homes may not have any nearby outlets on your kitchen countertops and will require an electrician to install additional outlets.

If you don’t have an outlet near where you want to place your water dispenser, be sure to check your cord length before purchasing one.

 FAQS

Conclusion

Installing a Primo water dispenser is easy, and it can save you time and money. This guide will give you all the tips and tricks you need to make the process as easy as possible. Just follow these simple steps and your Primo will be up and running in no time at all. Therefore its important to know How to Install Primo Water Dispenser.