Having a water dispenser in your home can be an excellent way to save money and improve your health. However, many people struggle with the task of unlocking their water dispenser.
The instruction manual is not always clear, and if you need to call for help, there are additional fees and time lost waiting for an answer.
This guide will give you the information on How to Unlock Sub Zero Water Dispenser: The Ultimate Guide.
Related article: How to Repair Insinkerator Hot Water Dispenser.
A Brief History of Sub Zero Technology
Sub Zero water dispensers were first introduced in 2010. They operate by filtering tap water and then cooling it to approximately 40 degrees below zero. This process is effective in removing dangerous bacteria and other contaminants from the water.
Sub Zero company offers four different types of water dispensers:
– The 22 inch model that can store up to four gallons of water
– A 27-inch model that can store up to six gallons of water
– The 30 inch, which has a storage capacity of eight gallons
– And the 36 inch model with a storage capacity of twelve gallons.
The majority of Sub Zero water dispensers use a filter system made by their affiliated company, Culligan. These filters need to be replaced every two months and cost about $7 each.
In order to unlock your new Sub Zero water dispenser, you’ll need to replace the old filter with a new one.
What does it mean to lock a water dispenser?
A water dispenser that is locked is one that has been coded to lock out users who aren’t authorized to use it. This means that any user who is not authorized to use the dispenser will be unable to operate it, even if it’s been left unlocked.
The person who locks the dispenser will be the only one who can unlock it, but only after the appropriate authentication has been performed, such as keying in a PIN or swiping a card.
A Sub Zero water dispenser is not hard to unlock, but it may take some time. Before being able to use the dispenser, you need to do a little prep work. You will also need an electrical outlet with a reach of at least ten feet.
To start, find the power cord and plug it into the back of your water dispenser. Next, you’ll want to connect one end of the extension cord to an outlet that is at least ten feet away from where you plugged in the water dispenser’s cord.
The other end of the extension cord should be plugged into your outlet. Now, with all cords connected, plug in your appliance and turn if on!
Why should you know how to unlock Sub Zero Water Dispenser?
As we have discussed above, a water dispenser that is coded can only be accessed by authorized users. So, if there is no one authorized to use the dispenser in your workplace, it will be locked for good. It’s quite frustrating when you don’t know how to unlock Sub Zero Water Dispenser.
Your colleagues might have tried to unlock it but to no avail. You might have approached the admin once before, but they might have been too busy to help. All of this can be avoided if you know how to unlock Sub Zero Water Dispenser.
You might need to access the water dispenser if you forgot to bring your water bottle from home. You might also want to help your sick colleagues out by getting them a glass of water from the dispenser.
How to enable the key access feature on your office’s water dispenser?
Key access is a feature that is commonly found in offices that have water dispensers. It works on the basis of an RFID ring that is authorized to access the dispenser.
The RFID ring is usually provided to employees who have administrative or managerial roles. If your office has this feature, you can use it by following these steps:
– Find out if your office has a water dispenser with key access. If so, check if you have access to it.
– If you don’t, try and convince your manager to give you one.
– If you have it, proceed to step 2.
– If it’s not the right ring for you, you can always approach your admin to provide you with the one meant for office managers.
How to unlock the Sub Zero Water Dispenser Manually?
In case your office does not have the key access feature, there is a chance that it is coded. In this scenario, you will have to unlock the water dispenser manually.
To do so, follow these steps: – Check if the water dispenser is coded. If it’s not, you can skip to step 3. If it is, try keying in the correct combination of buttons.
If it doesn’t open, you will have to proceed to step 2.
– Try keying in the wrong combination of buttons. This will force the dispenser to lock out all users and will prompt you to enter the right combination again.
– If you have tried all combinations and still have no luck, you can try to manually unlock the water dispenser.
Ways to enable and unlock the water dispenser
You can manually enable and unlock the water dispenser in two ways:
– If the water dispenser is not coded, you can use the button on the dispenser to enable it for yourself.
– If the water dispenser is coded, you can use your own device (wherever possible) to disable the dispenser’s code for yourself.
This can be done via an app, browser-based code, or a key fob. In case you are using the browser, make sure the dispenser’s code is not the same as that of the network.
How to enable the water dispenser remotely?
If your office’s water dispenser is connected to the network, you can also use the network’s Admin tools to enable the water dispenser. This can be done via the following steps: –
– First, log in to the network’s Admin console.
– Search for the water dispenser in the network’s Admin console and click on it.
– Click on the ‘Enable’ button in the water dispenser’s page. This will enable the water dispenser for all users connected to the network.
– Alternatively, you can click ‘Enable for user’ to enable the water dispenser for a specific user.
Conclusion
We hope that this article helped you understand why and when you need to unlock the water dispenser. We also discussed how to enable the water dispenser remotely and how to enable and unlock the water dispenser manually.
In addition, we also discussed the different ways to enable and unlock the water dispenser. Now that you know how to unlock Sub Zero Water Dispenser, you should also know when it’s appropriate to unlock it.
In case you are using the water dispenser because you forgot to bring your water bottle from home, you should be drinking water from a bottle that’s been thoroughly washed and cleaned.
In case your colleague is sick, you should be getting the water from a water source that has been thoroughly washed and cleaned. This is because you don’t want to get sick, either.
FAQS
What can you do if your water dispenser is locked?
If your water dispenser is locked, it means you need to input a code. The most common way this is done is by entering a four-digit PIN code. You may be asked to perform this task the first time you turn on your Sub Zero water dispenser.
How do I change the password for my water dispenser?
If you want to change your password for your Sub Zero water dispenser, there are two options: automatic and manual.
With an automatic password changer, the device will have a built-in feature that changes your password automatically. This happens every 24 hours, so if you forget what your new PIN code is, all you need to do is wait 24 hours and it will change automatically! If you don’t like this method or want more control over when it changes, then opt for a manual password changer. This option allows you to set any date and time when the new password will go into effect.
Does this mean I can only drink the water from my Sub-Zero water dispenser?
No way! The beauty of a Sub-Zero water dispenser is that it gives you the ability to drink cleaner, better tasting water from any tap in your home. It also means you have more control over the amount of chlorine and fluoride that goes into your body.
Can I install my own Sub-Zero water dispenser?
Maybe. You should check with a qualified professional before installing any appliance in your home. Fortunately, Sub Zero has an installation specialist that can help you get started with your new purchase.
Can I use my Sub-Zero water dispenser outside?
The simplest answer is no. This device is designed for indoor use only.
Conclusion
The Sub Zero water dispenser is a great addition to any home. If you have one and it’s not working properly, or if you’re looking to buy one and have some questions, this article will help you out.
After reading this article, you should be more confident in your ability to clean, maintain and operate your Sub Zero water dispenser. You now have an understanding of the importance of cleaner water and why it’s important to maintain your Sub Zero water dispenser.
We hope that this article has been helpful to you.
