Light coming through the top of curtains is a common problem. Curtains are usually hung from the ceiling or from a rod near the top of the window. This means that if you have curtains that are too long, or if they are not spaced evenly, a gap will appear at the top of the curtain.
Even if this gap is too small to see, it can still cause problems with your room because light will seep in and disrupt your sleep cycle. Learn how to cure this problem by following these simple steps.
Related Article: How to Remove Curtains for Motorhome
Identify the problem
The first thing you need to do is identify the problem. You don’t want to start trying solutions if you aren’t sure what’s wrong.
Once you know that light is leaking in, take a pencil and draw a line up the back of the curtains. This will show you how much material needs to be trimmed off.
If you think that your curtains might be too long, take them down and measure them against the window. The curtains should reach the edge of the window frame or hang about an inch below it. If they are too long, use scissors to trim them down to size.
You can also place weights at the top of each curtain rod to help ensure that they are spaced evenly.
Find the source of light
coming through the top of your curtains
First, you need to figure out where the light is coming from. Sometimes it will be just be a small hole at the top of your curtain and it won’t be noticeable. If you’re lucky, you can just sew up this hole with some thread and your problem will be solved.
However, if you find that there is fabric pulling across the window frame like in the photo, then you will need to make some adjustments.
Understand your options for fixing this problem
There are a few different solutions for this problem.
One is to simply shorten the curtains. This is a simple solution and one that many people resort to when they have curtains with a design at the top of them. You can remove some of the fabric from the bottom of your curtain so that it is not so long, or you can sew a new hem higher up on the curtain, which will shorten it as well.
Another option is to buy a cheap rod from any hardware store and place it at the top of your window. This will cause your curtains to either be too short or hang uniformly from the rod.
The most expensive option is to purchase blackout curtains. These are made out of thick material that blocks out light completely, but they also keep warm air in during colder months, and help keep cold air out during warmer months.
Choose the option that best matches your needs
The simplest solution to this problem is to have your curtains shortened. This is the best option if you don’t like the look of shorter curtains or if you don’t want to spend money on new curtains. You can also choose to remove the rod that holds up your curtains, which will eliminate the gap at the top of your window. If you’re more crafty, you can try sewing some fabric over the rods holding up your curtain to fix this problem.
Follow the instructions for your chosen solution
For the first solution, you will need to purchase some type of fabric adhesive. You can use this to seal the top of your curtains so that light does not come through. The only downside is that it may change the way your room looks. For the second solution, you will need to purchase metal clips and some curtain hooks. Line up your curtain at the top with these clips and hooks. This should stop any light from coming through the top of your curtains.
The third solution requires some sewing skills. You will need to sew one end of your curtain directly to the other end without using a rod or any kind of tension bar in between them. Be sure to make small stitches with a thin needle and thread if possible, as heavier threads may cause damage over time.
The fourth solution is easy but can be costly depending on how many curtains you have in your room. You will need to buy extra-wide curtains for each window in order for them not to overlap at the top when they are hung from a rod or ceiling mount. This way there won’t be any gaps between them because their weight will keep them flush against one another even if they are not hung evenly from one another.
Why your curtains are too long or not spaced evenly
Some curtains are too long because they are too wide, or because the curtain rod is not positioned correctly. If you have a wide window, you could hang your curtains closer to the center of the window. And if your curtain rod is not in the center of your window, then try moving it to that position.
If your curtains are not spaced evenly, you can either move one of them up to fix this problem, or take them down and re-hem them so that they will be evenly spaced.
Add weights at the bottom of the curtain
One way to keep light from coming through the top of your curtain is to add weights at the bottom of it. This will automatically cause your curtains to hang lower and, therefore, cover the gap at the top. The best place to place these weights is on a rod that’s mounted on or near the wall behind your window. You can then wrap a rope around the weights and attach it to the bottom of your curtains. Once you’ve attached your rope to both ends, it should be easy for you to adjust them until they’re hanging evenly in front of your window.
You could also use something like a towel bar instead of a rod if you don’t have one in that area. The key is finding an object that will hold up your weight well and that doesn’t take up too much space in your room. You’ll want a bar that can span from one end of your window to another easily, with enough excess for you to tie off each end with a piece of string or twine.
There are many other ways you can cure this problem as well! For example, if there is no space for a rod or towel bar above your window, try placing sandbags beneath one side of the curtain panels. If sandbags aren’t an option for you either, try using bags filled with rice or beans instead! The idea is for them not only be heavy but also soft so they’ll compress into small spaces when needed and be easy for you to store when
Determine the length of your curtains
The first step in this process is to determine the length of your curtains. If they are too long, you will need to shorten them at the bottom. If they are too short, you will need to add fabric to the top.
Measure the height of the window and subtract six inches for a space on each side. This will be the maximum height of your curtains (this is important).
If your curtains are more than six inches too short, you’ll need to use some fabric or other material like tulle or lace. Cut the fabric long enough so that it covers more than one curtain rod on each side of the window; this way, you can tie it in place on the inside of the curtain rod with a safety pin.
If your curtains are too long, make sure they don’t bunch up when hanging from a rod by using a tension rod instead. Or, even better, take a hemline iron and iron down one side of your curtain so that it’s shorter than the other side. Now hang it from a rod by folding over one side and securing with a safety pin at eye level so you’ll have less light coming through at night when you’re sleeping!
FAQS
What are some other solutions to this problem?
One way to fix this problem is by adding valances or cornices that will cover the top of the curtains. You can also shorten your curtains so that they are not too long. Another option is to attach a rod near the top of the window, which will place the curtain closer to the bottom of your window panes.
How do I hang my curtains so that light doesn’t come through ?
To prevent light from coming in from the top of your curtains you’ll want to measure how much space you have between your window and ceiling. Measure from the top of the curtains all the way down to where they should be hung. Once you have that measurement, add an extra 3-5 inches for room at the bottom and then cut your curtain accordingly, leaving it with a hemmed edge on each side.
There are a few ways in which you can solve this problem, but they all involve making sure that there isn’t a gap at the top of your curtains. You could add valances or cornices, shorten your curtains or move your rod lower. The most important thing is preventing light from coming in from any part of them because it can disrupt sleep cycles and make people sick due to lack of sleep!
Conclusion
Your curtains are an important part of your home or office’s décor, but you might notice that light can come in through the top. This might not seem like a big deal, but it becomes a problem when you use your curtains for privacy.
Light coming in through the top of your curtains can cause glare on your TV screen, make it difficult to read, and interrupt your sleep.
First, determine the source of the light coming in. You might find that you have a floor lamp or other lamps too close to the window, or that the curtains are too long or not spaced evenly.
Next, decide what type of solution will work best for you. Do you want to add weight at the bottom of the curtain, determine the length of the curtain, or adjust the curtain rod? It’s important to pick the right solution to address your specific problem.
But before you make any changes, make sure to measure your windows and order any necessary hardware to fit your home or office space.
2 thoughts on “How to Keep Light from Coming Through Top of Curtains.”
Comments are closed.