You could be wondering How to Use Primo Water Dispenser, here is what you need to do. Staying hydrated is essential to your health. But, it’s hard to know when you’re drinking enough water if you don’t have a way to measure it.
That’s where the Primo Water Dispenser comes in. Using an easy-to-read digital display, this dispenser shows you the exact number of liters you’ve consumed each day and tells you when you need more water.
It also features an extra-large reservoir that holds up to 10 liters of clean drinking water at a time as well as a convenient pause/resume button so you can fill up your bottle or cup on the go. With this guide, learn How to Use Primo Water Dispenser and understand its many benefits.
You may also look at our other article on How to Clean Water Dispenser with Vinegar
The Primo Water Dispenser: What is it and what does it do?
How to Use Primo Water Dispenser as a matter of importance. The Primo water dispenser, manufactured by Primo International, is a water filtration device that makes getting the right amount of water easy.
It has a large 10-liter reservoir that you fill with tap or purified drinking water. Then, all you have to do is press the on button and voila! Your machine dispenses the desired volume of your chosen beverage—and it automatically shuts off when you reach your goal.
The dispenser features an extra-large digital display that shows the number of liters dispensed as well as how many more you need to drink for today. It also includes a pause/resume feature so you can fill up your bottle or cup on the go.
How to Set Up Your Dispenser
On How to Use Primo Water Dispenser, setting up your Primo Water Dispenser is easy. To start, you’ll need to connect the water dispenser to a standard electrical outlet. Next, fill the reservoir with fresh water and press the “Reset” button on the digital display.
The display will show you how many liters of water you’ve consumed each day. If you want to change your consumption goal, simply press the arrow buttons and type in a new goal number (between 1-20).
Once you’ve set your desired consumption goal, be sure to drink enough water throughout the day for it to work properly.
Step 1: Install your water dispenser
Installing your water dispenser is as easy as setting it on a countertop. If you wish, you can use the mounting bracket that came with your Primo unit to install the dispenser on a wall or under a cabinet; but this is not required and you can save the bracket for use later if you want to switch locations.
Before you set your water dispenser into place, be sure to read and understand the following sections on water supply, filter, and faucet installation.
Step 2: Hook up the water supply and filter
If you have hard water, now is the time to install an optional water softener. Follow the instructions that came with your water softener to set it up and connect it to your water dispenser.
Otherwise, you can connect your water dispenser to a standard household water supply that is fed by either a well or municipal water system.
Note that the water dispenser you buy may be labeled “for indoor use only” or “for outdoor use only”; but some models can be used indoors or outdoors, depending on your water supply.
If you are using a water dispenser that is labeled “for indoor use only,” check with your local building department to make certain that you are in compliance with local codes for outdoor water connections. This is important when you want to know How to Use Primo Water Dispenser.
Step 3: Install the Primo faucet
The faucet that came attached to your water dispenser is a standard kitchen faucet that is easy to install. If you are connecting the dispenser to an outdoor spigot, use the included outdoor faucet adapter to connect the indoor faucet to your outdoor water supply.
If your water supply is fed by a well, you can skip this step; but if you are connecting to municipal water, be sure to install the faucet as shown in the diagram on page 2. This will ensure that you are in compliance with all applicable codes.
Step 4: Put in the batteries and test your remote
The first time you use your water dispenser, you should test your remote control by pressing each of its buttons.
Each button will light up, and the water dispenser’s blue light will flash briefly as you press each button, indicating that the remote is working properly. If you have a wireless unit, you can set up the wireless communication at any time.
First, put in the batteries in the remote, and then push the “Wireless Setup” button on the Primo dispenser. If you have an indoor/outdoor model with a wired remote, you can set up the remote-control functionality at any time. Press the “Remote Setup” button on the Primo dispenser to begin setting up the remote control.
Step 5: Enjoy your new water dispenser.
Now that your water dispenser is installed, connected, and ready to use, you can enjoy the benefits of fresh, bacteria-free water that you can drink directly from a faucet whenever you like.
You can easily dispense a single cup of water with a quick turn of the faucet handle, or you can fill a pitcher or larger container with filtered water.
Each time you dispense water, you will be reminded of the money you are saving by eliminating bottles and cans; and you will enjoy the peace of mind of knowing that you and your family are drinking only the purest, most bacteria-free water possible.
How to Pour Your Drink
The first step in using your Primo water dispenser is to fill the reservoir with water. This can be done by opening the top lid and pouring clean water into the reservoir. You’ll know it’s full when you feel the weight change when lifting it up.
To pour a drink, simply press the button on the side of the dispenser that corresponds with your desired beverage type (straight water, iced tea, hot coffee, etc.). It will automatically dispense onto your cup or glass and track how many liters you have poured.
How to Measure Your Drink
The Primo Water Dispenser is an accurate way to measure the amount of water you’ve consumed each day. Basically, it measures in liters and tells you when you need more water. This device measures your drink in a very simple way.
To measure the amount of water you are drinking, just press the button on the front of the device that says “Current Liters”. You will see a number next to this button (ex. 3.8) which is how many liters of water you have consumed so far today.
The Primo Water Dispenser also displays a digital clock and, on the bottom left corner, a countdown timer showing how long it has been since your last drink was taken from the dispenser.
The Primo Water Dispenser also features an extra-large reservoir so that you can fill up your bottle or cup on the go without interrupting your drinking routine. It holds up to 10 liters of clean drinking water at a time, making it easier for those who want to stay hydrated all day.
The dispenser also includes an easy-to-use pause/resume button that allows one-touch filling of both cups and bottles with water from its large reservoir – no need to carry around heavy jugs or wait for someone else to refill your bottle!
What Comes with the Dispenser?
Primo water dispensers are sold with a 10-liter reservoir, a water filter cartridge, a Cartridge Holder, and a Pause/Resume button.
The Primo Water Dispenser
The Primo Water Dispenser is a convenient way to stay hydrated. It features an easy-to-read digital display that helps you know when it’s time to drink more water. The dispenser shows you the exact amount of liters you’ve consumed each day and tells you when you need more.
It also has an extra-large reservoir that holds up to 10 liters, which means you don’t have to worry about refilling it constantly. Plus, the Primo has a pause/resume button so you can fill your bottle or cup while on the go.
The Primo Filter Cartridge
Primo filters are made of four layers of safe and durable material that provide protection from all types of impurities.
These filters are tested to safeguard against both harmful bacteria and microorganisms, making them NSF-certified. This means that the cartridge is capable of maintaining water purity for up to three months without requiring replacement.
The Primo filter cartridge has a seal to prevent leaks and is designed specifically for Primo’s dispensers. It also features a built-in sensor system with a red light on the top that lets you know when it’s time to replace the cartridge.
Why You Need a Dispenser?
It can be hard to know how much water you’re drinking each day. There are some estimates that suggest that the average person needs about six 8-ounce glasses of water per day. But, for many people, those numbers are confusing.
For example, one may need more than the estimate if they’re running a fever or have an infection. One may need less if they are in a hot climate or live at high altitude. It’s not always easy to keep track of your intake unless you’ve got a way to measure it.
That’s where the Primo Water Dispenser comes in handy. This dispenser helps you drink enough water by telling you when you need more and how much you should drink each day. The machine has an easy-to-read digital display that shows your current consumption and suggests how much more you should drink each day in milliliters (ml).
It also features an extra-large reservoir that holds up to 10 liters of clean drinking water so you can take your beverages on the go without worrying about running out as well as a convenient pause/resume button so you can fill up bottles or cups while on the go.
How do you use Primo water refill station?
Before you can dispense water from your Primo dispenser, you must first fill its water tank from your tap. We recommend that you first remove the dispenser’s access panel (located on the back of the unit), which will allow you to easily lift the water tank out of the dispenser and fill it from the top.
The water tank holds 23 gallons — enough to refill the dispenser’s water tank 5 times or to provide a family of 5 with water for more than 2 months. You can refill the water tank either by pouring water directly into it or by using your faucet’s shut-off valve as a spout to fill the tank.
How do you get water out of a Primo water dispenser?
To dispense water from your Primo dispenser, you must first open the dispenser’s water access panel, which is located on the front of the unit. The panel is opened by rotating it 90 degrees counterclockwise. Next, press the dispenser’s dispense button to release water from the dispenser and into your cup.
The dispenser’s dispense button can be pressed either once or repeatedly to control the flow of water. The first time you press the dispenser’s dispense button, you will feel a brief resistance to the water flow. This is normal, as it indicates that the dispenser is beginning to filter the water.
Once the flow of water becomes smoother, this indicates that the water has been fully filtered. The duration of the initial flow interruption will vary depending on the amount of contaminants in your water and the type of filter in your dispenser.
How does the Primo water dispenser work?
After you have filled your Primo dispenser with water, activated the dispenser’s filter by pressing a button on its control panel, and opened the dispenser’s water access panel, water can be dispensed from the dispenser at the push of a button.
Primo dispensers provide filtered water in 3 ways: By filtering water as it is dispensed. The water tank and dispenser filter contain replaceable activated carbon filters that remove contaminants from the water as it passes through them.
A full tank with a new filter can filter about 25 gallons of water before requiring a filter change. By producing steam to sanitize the interior of the dispenser. Inside the dispenser’s water tank, boiling water generates steam to kill bacteria and other microorganisms.
A sanitizing process like this is more effective than boiling water in a pot on a stove because it is done at the correct temperature and for the correct length of time. By using ultraviolet light to kill bacteria. A germicidal ultraviolet lamp mounted inside the dispenser’s control panel produces ultraviolet light to kill bacteria in the water.
You may also look at our other artcle on How to Remove Cap from Water Dispenser Bottle
FAQS
What is the maximum number of liters the dispenser holds?
The Primo can hold up to 10 liters.
How do I know when I need more water?
The dispenser features a digital display that tells you how many liters you’ve consumed and how many you need to drink.
Can I pause the dispenser while it’s filling my bottle?
Yes, the pause/resume button allows you to fill your container on the go.
How many liters are in a cup?
There are eight (8) cups in one (1) liter. The Primo® Water Dispenser dispenses one cup at a time and counts down accordingly.
What’s the difference between regular tap water and filtered water?
Regular tap water can contain harmful bacteria, such as lead and chlorine, which can be unhealthy to drink over long periods of time. Filtered water removes these harmful substances while still providing pure hydration.
How do you get water out of a Primo water dispenser?
After filling your dispenser, you can dispense water into any container of your choice. Use the spout on the front of the unit to fill up cups, pitchers, and water bottles. You can also use the dispenser to fill a watering can or bucket with water for houseplants. The dispenser’s spout has a shut-off valve that can be opened or closed as needed. When dispensing water, open the valve to let water flow out. When you’re done, close the valve to prevent leaks and spills. To fill a larger container, such as a pitcher or water cooler, remove the spout from the dispenser. To do so, pull the spout out of the dispenser and turn it counterclockwise. After you’ve filled the larger container with water, you can then reattach the spout to the dispenser.
How does the Primo water dispenser work?
The dispenser features a built-in filtration system. When the unit is turned on and water flows through the dispenser, its filter removes impurities and contaminants from your tap water. Primo models are available with a variety of filters, each designed to remove a different set of contaminants. Some models also include a carbon filter, which helps to reduce odors and improve the taste of your water. To see exactly how many impurities your specific model of the filter can remove, visit the manufacturer’s website and use their product selector to choose the model of dispenser that’s best for your household.
Conclusion
Now you know everything you need to know about your Primo water dispenser. The next step is to get the filter cartridge for your dispenser. You can find the Primo water dispenser filter cartridges on Amazon, which you can order for free and have them delivered right to your door.
Primo water dispensers are extremely convenient and cost-effective ways to reduce the amount of plastic bottles from which we drink water. Primo dispensers can save you money, too — a single unit will pay for itself in about a year, based on its ability to reduce the number of 20-ounce water bottles that you would otherwise buy at $1.50 each.
With a Primo water dispenser, that same $1.50 can be spent on a month’s supply of filtered tap water instead — at just 25 cents per gallon — and without any need to stock or recycle empty bottles or cans. Installing and using your Primo water dispenser efficiently, however, requires some planning and attention to detail. It’s great that now you know How to Use Primo Water Dispenser.
